The Hydra-Matic 6L80 (production code MYC) is a six-speed automatic transmission produced by General Motors for use in rear- and rear-biased all-wheel-drive vehicles with a longitudinal powertrain.
- In late 2005, General Motors introduced the 6L80E six speed automatic transmission. Featuring clutch to clutch shifting, it eliminated the one-way clutches used in earlier transmissions. Its eight-speed successor, the 8L90E was introduced in 2014. ATI is now developing components to upgrade your 6 and 8 speed transmission!
- 6L80E info With the Gen4 engine swaps we use a GM 6l80E 6 speed automatic transmission. A transfer case adapter allows us to use the stock Jeep JK 241J transfer case. The Rubicon transfer case will not work because no one that we know of makes a 32 spline input shaft for it.
- Exceptional torque rating Developed with upgraded internal components, Chevrolet Performance’s SuperMatic 6L80-E 6-speed automatic transmission offers an exceptional torque rating of 650 lb.-ft. – a 45 percent increase over regular production versions of the 6-speed automatic.
- The 6L80/6L90E transmission fills a much needed duty gap between the versatility of the 4L series and the Allison variety. All previous GM transmissions had been based on hydraulic controls with more electrical aspects with each upgrade, but this unit was developed as a electro/hydraulic controlled transmission.
The 6L80 Hydra-Matic transmission is a 6 speed automatic transmission manufactured by General Motors. It was created to help GM meet ever more demanding CAFE regulations on their vehicles. By utilizing more gearing, the 6L80 keeps the car in it’s power band longer, improving the MPG of the vehicle between 4-7% (over the previous generation fours speed transmissions) depending on the configuration of the vehicle that it’s in.
It began replacing the 4L60E transmission in many vehicles starting in the 2006 model year. The 6L80E went mostly into large vehicles with V8 motors. For the most part, this transmission has been phased out by the 8L90E already, but is still in prodution.
Unlike the 4L60E and 4L80E, the 6L80 is not always referred to as with the E on the end because it’s been over 25 years since the last non electronic GM transmission has been in production.
The 6L80 was used in trucks, particularly in the GMT 900 platform. The exceptions to this would be the 2006-2014 Corvette, 2006 G8, 2010-2015 Camaro, and the Chevrolet SS. In fact, the only 2017 model year vehicle that still comes with this transmission is the Chevrolet SS.
6L80E Specs
The 6L80 is a robust transmission and can handle a ton of power. In fact the input torque rating is 440 lb. and it can handle a total gross vehicle weight of 8,600 lb, which makes it a great transmission for LS swaps with no modification needed whatsoever.
Presidents choice slow cooker. It’s a longitudinal transmission (that’s what the L in 6L80E stands for). This means that it’s designed for rear wheel drive vehicles only. It has a line pressure tap for diagnostic purposes.
Here are the basic specs for the 6L80E: Fci esd login.
| Manufacturer: General Motors |
| Production: 2005+ |
| Type: 6 Speed Automatic, 10-12.6 quart capacity (dependent upon application) |
| Max RPM: 6500 |
| Input Shaft: Application dependent |
| Torque Converter Lock: Yes |
| Overdrive: Yes, 2 gears |
| Case Length: 23.5″ |
| Outer Case Material: Cast Aluminum |
| Controlled by Computer: Yes |
| Dry Weight: 195 lb. Wet Weight: 207-227 lb. wet |
6L80E Gear Ratios
The 6L80E uses four under drive gears and two overdrive gears. It does not have a direct 1:1 ratio like the 4L80E and 4L60E, which is worth noting. The 6L80E’s gear rations are as follows:
Gear | Ratio |
| 1 | 4.027 |
| 2 | 2.364 |
| 3 | 1.532 |
| 4 | 1.152 |
| 5 | 0.852 |
| 6 | 0.0667 |
| Reverse | 3.064 |
6L80E Identification
There are two super easy ways to tell whether or not the transmission is a 6L80E. Which one you use is going to depend on whether or not the transmission is in or out of the vehicle. If the transmission is in the vehicle you can use the RPO tag in the glove compartment. If you know the RPO code for the transmission you are golden. It’s like where’s Waldo. Just keep scanning it until you find the one you are looking for.
6l80e Transmission Stand Alone Controller
GM Transmission RPO Codes:
- 6L80– MYC
- 6L90- MYD
- 4L60E- M30
- 4L60E- M30
- 4L60E- M30
- 4L65E- M32
- 4L80E- MTI
Every modern GM vehicle has one of these sheets in its glove compartment. Use it to verify the vehicle has a M30 4L60ENow, if the transmission is out of the vehicle (or if you don’t trust a sticker), the 6L80E has an 18 bolt case. That’s more than almost any other GM automatic transmission. It looks nearly identical to the 6L90. For all practical purposes, these two transmissions are completely interchangeable.
The 6L90 has a beefier set of gears and many internal upgrades. Like most GM automatic transmissions, the easiest way to tell them apart is by using the pan gasket. Conveniently, the main transmission that the 6L80E is going to be confused for all have a different number of pan gasket bolts. See the pictures below to help you tell if you have the right transmission.
They all look really similar, so make sure that you bother to count the pan gasket bolts, especially if you have an untrained eye.
Conclusion
6l80e Transmission Identification
That’s pretty much all that’s to it. If you have any questions that I may be able to help you with, drop a comment or contact me.